Torch Height Controller New model
XPTHC-100III inherits the characteristics of high reliability of the 100II type regulator. It has all the functions of the original XPTHC-100II and has better performance. The main features are as follows:
1, the operation interface from the new design, added a variety of practical instructions, such as collision instructions, up and down instructions, etc., beautiful interface, more functions.
2, interference interference has been redesigned, anti-jamming performance is stronger.
3, increased dynamic perforation function, suitable for all kinds of large-scale plasma cutting, can extend the life of vulnerable parts.
Acceptable level signals and pulse signals for dynamic punch control, flexible in use.
4, the shape and control circuit retains the original XPTHC-100II type characteristics, interchangeable.
|Product model||XPTHC-100 III|
|Size||Length, width ,height 320*260*90(mm)|
|Working voltage||AC 24V ± 10% 50HZ / 60HZ|
|Lifting motor||DC 24V DC motor|
|Drive mode||PWM delta modulation technique|
|Output current||1A~4A MAX 6 A|
|Stable work||Height regulator：-10℃-60℃|
|Initial positioning mode||There are two ways: proximity switch positioning, protective cap contact positioning|
|Partial pressure ratio||100：1|
|Control accuracy||±1V~±3V (It can be adjusted according to user）|
|Cutting torch lifting speed||500mm/min~4000mm/min(More than 4000mm/min, the user orders should be explained, or users adjust according to the instructions)|