New Fashion Design for Metal Tube Laser Cutting Machine - Pressure gauges (acetylene, oxygen) – Yomi

Short Description:

(1)     Check whether the seal of the instrument is intact before use, and whether the specification is suitable. (2)     When measuring the steady pressure, the instrument shall not exceed 3/4 of the upper limit of instrument measurement. When measuring fluctuation pressure, the instrument shall not exceed 2/3 of the upper limit of instrument measurement. (3)     The instrument should be stored in the ventilated and dry room, the indoor air should be clean, and there is no corrosion to the ...


Product Detail

Product Tags

Related Video

Feedback (2)

Assume full duty to satisfy all demands of our clients; reach steady advancements by marketing the development of our purchasers; grow to be the final permanent cooperative partner of clientele and maximize the interests of customers for Angle Cutter Machine , Flame Pipe Cutting Machine , Steel Cutting Laser Machine , We just not only provide the high quality to our customers, but more even important is our best service and the competitive price.
New Fashion Design for Metal Tube Laser Cutting Machine - Pressure gauges (acetylene, oxygen) – Yomi Detail:

Pressure gauges (acetylene, oxygen)2

(1)     Check whether the seal of the instrument is intact before use, and whether the specification is suitable.

(2)     When measuring the steady pressure, the instrument shall not exceed 3/4 of the upper limit of instrument measurement. When measuring fluctuation pressure, the instrument shall not exceed 2/3 of the upper limit of instrument measurement.

(3)     The instrument should be stored in the ventilated and dry room, the indoor air should be clean, and there is no corrosion to the instrument.

(4)     The vibration condition of the instrument working normally should not exceed level V.H.3 of GB4439 – 84, (when the frequency f is less than 57-62HZ, the displacement amplitude Fs is less than 0.075mm; when the frequency f is greater than 57-62HZ, the acceleration amplitude Fa is less than 10m/s)

(5)     The instrument is suitable for use in places where the ambient temperature is between -45℃to +60℃ and the relative humidity is not greater than 80%.

(6)     The instrument in use must be checked regularly, at least once every six months.

(7)     Filter should be added when solid inclusions are contained in the tested medium.


Product detail pictures:

New Fashion Design for Metal Tube Laser Cutting Machine -
 Pressure gauges (acetylene, oxygen) – Yomi detail pictures


Related Product Guide:
Leveraging Rental Welding Equipment
Used Welding Equipment – Different Processes Where it is Being Utilized

All we do is usually affiliated with our tenet " Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for New Fashion Design for Metal Tube Laser Cutting Machine - Pressure gauges (acetylene, oxygen) – Yomi, The product will supply to all over the world, such as: Jordan , Cyprus , Slovakia , We have constructed strong and long co-operation relationship with an enormous quantity of companies within this business overseas. Immediate and specialist after-sale service supplied by our consultant group has happy our buyers. Detailed Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Free samples may be delivered and company check out to our corporation. n Portugal for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
  • The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
    5 Stars By Andy from Leicester - 2015.03.03 13:09
    Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!
    5 Stars By Daisy from Iceland - 2016.06.19 13:51

    Related Products

    WhatsApp Online Chat !