New Fashion Design for Angle Channel Cutting Machine - Pressure gauges (acetylene, oxygen) – Yomi
New Fashion Design for Angle Channel Cutting Machine - Pressure gauges (acetylene, oxygen) – Yomi Detail:
(1) Check whether the seal of the instrument is intact before use, and whether the specification is suitable.
(2) When measuring the steady pressure, the instrument shall not exceed 3/4 of the upper limit of instrument measurement. When measuring fluctuation pressure, the instrument shall not exceed 2/3 of the upper limit of instrument measurement.
(3) The instrument should be stored in the ventilated and dry room, the indoor air should be clean, and there is no corrosion to the instrument.
(4) The vibration condition of the instrument working normally should not exceed level V.H.3 of GB4439 – 84, (when the frequency f is less than 57-62HZ, the displacement amplitude Fs is less than 0.075mm; when the frequency f is greater than 57-62HZ, the acceleration amplitude Fa is less than 10m/s)
(5) The instrument is suitable for use in places where the ambient temperature is between -45℃to +60℃ and the relative humidity is not greater than 80%.
(6) The instrument in use must be checked regularly, at least once every six months.
(7) Filter should be added when solid inclusions are contained in the tested medium.
Product detail pictures:
Related Product Guide:
Leveraging Rental Welding Equipment
Picking the Right Welding Equipment
We support our consumers with ideal good quality merchandise and large level provider. Becoming the specialist manufacturer in this sector, we have attained wealthy practical encounter in producing and managing for New Fashion Design for Angle Channel Cutting Machine - Pressure gauges (acetylene, oxygen) – Yomi, The product will supply to all over the world, such as: Swansea , Nepal , Ghana , Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.
By Meredith from Gabon - 2016.12.02 14:11
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Rae from San Francisco - 2015.12.05 13:53